# Tasker Cooldown for Tracking Walks?

**URL:** <https://forum.beeminder.com/t/tasker-cooldown-for-tracking-walks/5372>\
**Category:** Akrasia\
**Created:** [May 24, 2019, 11:14am UTC](https://forum.beeminder.com/t/tasker-cooldown-for-tracking-walks/5372 "2019-05-24T11:14:49Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![narthur](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.beeminder.com/narthur/32/5113_2.png) [@narthur](https://forum.beeminder.com/u/narthur)\
**Post date:** [May 24, 2019, 11:14am UTC](https://forum.beeminder.com/t/tasker-cooldown-for-tracking-walks/5372/1 "2019-05-24T11:14:49Z")

</div>

I’m trying to use Tasker to automatically post a datapoint to a goal when I go for a walk. I’ve set it up to do so when it sees a wifi network a little ways from my apartment. Problem is, it sees that network both going and coming, so two data points end up being added.

I could find a network at the end of my walk and do that, of course, but I don’t want to do that because I want to give myself the freedom to take shorter walks sometimes.

Does anyone know how I could set up a task or context so that it only activates if the task hasn’t run within the past hour?

I tried using the timeout option on the task edit screen, but it turns out that this option is only a delay for waiting for the plugin to run, and doesn’t have any impact on whether or not the task is activated based on previous activations.

---

<div class="post-metadata">

**Author:** ![narthur](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.beeminder.com/narthur/32/5113_2.png) [@narthur](https://forum.beeminder.com/u/narthur)\
**Post date:** [May 24, 2019, 3:21pm UTC](https://forum.beeminder.com/t/tasker-cooldown-for-tracking-walks/5372/2 "2019-05-24T15:21:12Z")

</div>

I think I fixed it using the instructions here:

> **[r/tasker - Stop Task from being executed repeatedly](https://www.reddit.com/r/tasker/comments/ah44sv/stop_task_from_being_executed_repeatedly/?utm_source=BD&utm_medium=Search&utm_name=Bing&utm_content=PSR1)**
>
> 3 votes and 6 comments so far on Reddit

---

<div class="post-metadata">

**Author:** ![philip](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.beeminder.com/philip/32/1505_2.png) [@philip](https://forum.beeminder.com/u/philip)\
**Post date:** [June 2, 2019, 1:20pm UTC](https://forum.beeminder.com/t/tasker-cooldown-for-tracking-walks/5372/3 "2019-06-02T13:20:43Z")

</div>

> [@narthur](#):
>
> Problem is, it sees that network both going and coming, so two data points end up being added.

The low-tech solution would be to add a half-point each time. Looks messy, but sums the same.

---

<div class="post-metadata">

**Author:** ![narthur](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.beeminder.com/narthur/32/5113_2.png) [@narthur](https://forum.beeminder.com/u/narthur)\
**Post date:** [June 2, 2019, 1:54pm UTC](https://forum.beeminder.com/t/tasker-cooldown-for-tracking-walks/5372/4 "2019-06-02T13:54:37Z")

</div>

Neat idea. 😃

The Tasker cooldown setting did the trick exactly like I was hoping for, though, so I’m sticking to that for now.
